Yakima Roof Rack Installation - 2021 Honda Accord- Video

Hi everyone. It's Angelina here etrailer.com. And, today we are looking at our Yakima roof rack system with baselines towers and jet stream crossbars, here on our 2021 Honda accord. On your Honda accord, If you want to carry around a safe bike racks or roof basket, but you don't have a hitch you can pick up a roof rack like this from Yakima. And this works for naked roofs. Just like what we have here on our car. more

Watch Video

5/13/2021 4:25:52 PM

Yakima Roof Rack Review - 2018 Honda Accord- Video

Speaker 1: Today on our 2018 Honda Accord, we're going to be testing the Yakima Jetstream roof rack system. That's going to consist of part numbers Y00425. And that's going to be our 50 inch Jetstream crossbars. These also come in silver under part number Y00428. Down here we have our Yakima towers, and these are going to be part numbers Y00146. Down here we have our fit kit. more

Watch Video

10/25/2018 10:47:52 AM

Inno Roof Rack Review - 2015 Honda Accord- Video

Speaker 1: Today on our 2015 Honda Accord, we're going to be test fitting the Inno Aero Roof Rack System, consisting of part numbers INXB130-2. These are the Inno aero crossbars, 51 inches long. And then to hold them in place we have the Inno Through Feet, part number INXS250. And then to attach it to our vehicle, we have the fit kit here and that's going to be part number, INK592. Now this roof rack system is great for carrying a wider variety of accessories such as bike racks, cargo baskets, and cargo boxes. And unlike the flush mount system, you actually have a little more space to fit more accessories on top and if you wanted to, we do offer another style of this where the bars come out past the actual feet here to provide even more space.These are aero shaped bars that will cut down wind noise and drag while you drive. more

Watch Video

8/16/2018 5:07:46 PM

Inno Roof Rack Review - 2015 Honda Accord INK592- Video

Speaker 1: Today on our 2015 Honda Accord, we're going to be test fitting the Inno Aero Roof Rack System, consisting of part numbers INXB115-2, these are the Inno Aero Crossbars, 45 inches long. We'll also be using the Inno Flush Feet System to hold those bars in place. That's going to be part number INXS200, and finally we have the Inno Fit Kit to attach it to our actual Accord here. That's going to be part number INK592.This is a great roof rack system that can carry a wide variety of accessories ranging from bike racks to cargo baskets, to cargo boxes. The shape of the bars themselves is aerodynamically shaped, so that's going to cut down the wind noise and drag while you drive, eliminate the need for any fairings that you might need for say square bars. Moving onto our end caps, they do come with a lock already installed, so once you have everything on your roof, it's going to be secured to it, and removing our end cap here, you can see that we have this rubber strip up at the top here. more

Watch Video

8/16/2018 5:07:11 PM

Yakima Roof Rack Installation - 2013 Honda Accord- Video

Speaker 1: Today on our 2013 Honda Accord, we're gonna be test fitting the Yakima RoundBar roof rack system, consisting of part numbers Y00409. These are the round 50-inch crossbars for the Yakima roof rack systems. Part number Y00146, theses are the baseline towers for the Yakima crossbars. Part number Y03536, this is the RoundBar SL adapter for the Yakima baseline, Skyline, Timberline and Ridgeline towers. Part number Y06148 and Y006150, and these are the base clip fit kits that you're gonna need for your vehicle.The Yakima RoundBar roof rack system is great for carrying a wide variety of accessories on your rook or freeing up space inside your vehicle. These bars are tough and durable, and together have a combined carrying capacity of 220 pounds, but you always wanna check with your vehicle's manual to make sure you roof can withstand those weights.They're very easy to install. more

Watch Video

6/27/2018 11:17:23 AM

Rola Sport GTX Series Roof Rack Installation - 2009 Honda Accord- Video

Speaker 1: Today on our 2009 Honda Accord, we're going to be doing a test fit on the Rola Sports Series roof rack with GTX mounting system, part number 59757. This Rola roof rack system is going to allow you to carry roof mount accessories on your Honda Accord, things like bike racks, kayak carriers, roof boxes, and more.The crossbars have about 38 inches of usable space. They're made out of aluminum, and have an arrow style to them, which means they're going to be a lot more aerodynamic than your traditional round or square bars. And they're also going to reduce the need for a fairing. They're going to work with your standard clamp-on accessories, as well as some T-track mounted accessories. You'll simply remove or trim the rubber strip around those accessories.With the cover open, it's the perfect time to mention how it hides our included tool and protects our hardware. more

Watch Video

6/25/2018 3:57:12 PM

Rhino Rack Roof Rack Review - 2017 Honda Accord- Video

Today on our 2017 Honda Accord we'll be taking a look at the and showing how to install the Rhino-Rack. This is going to consist of the Rhino-Rack Vortex Aero crossbars, part number RRVA137B-2; the Rhino-Rack 2500 Series legs for the Vortex Aero bars, part number RRRLKVA; and the Custom DK Fit Kit for the Rhino-Rack 2500 Series legs, part number DK359. The Rhino-Rack Vortex Aero roof rack kit is a great solution for carrying your roof rack accessories as well as gear on your Honda Accord. This roof rack is a lightweight aluminum with an aerodynamic design, so it's going to help to reduce wind noise and drag. This design allows you to use channel-mounted as well as clamp-on accessories on your vehicle's roof, such as bike racks, cargo baskets, cargo boxes, water sport carriers, and ski and snowboard carriers. With our end cap removed, you can see that our weather strip is easy to remove and replace. It's also easy to cut down to use with channel-mounted accessories to help prevent any dirt, debris, or liquid from getting inside that channel. Then if we place on our end cap, it does lock into place, which provides extra prevention from theft and tampering to your channel-mounted accessories. more

Watch Video

1/23/2017 9:03:56 AM

Rhino Rack Roof Rack Review - 2010 Honda Accord- Video

Today on our 2010 Honda Accord we're going to be test fitting Rhino-Rack Roof Rack System, consisting of part numbers RRVA126B-2. Those are Vortex Arrow Crossbars, part number RRRLKVA. Those are the 500 series legs and part number DK184 and those are the clamps that will attach it to your vehicle. We already have the front one installed. You can see by the shape, it has a nice aerodynamic shape to it. Excuse me. more

Watch Video

9/28/2016 8:56:09 AM

Thule Roof Rack Review - 2008 Honda Accord- Video

Today on our 2008 Honda Accord we're going to be test fitting the Thule Rapid Traverse roof rack system, part number THARB53 for our aero blade, part number TH480R for our foot pack, and part number THKIT1560 for our fit kit. We'll begin our test fit by assembling our fit kit to our foot pack. To do so we'll take the pad and insert it onto the bracket here. As you can see, they are the same shape so you'll just want to press the perimeter of that pad onto the bracket. With that pressed on we're ready to put our clamp on there. We'll pull down here, line this up. more

Watch Video

10/16/2014 2:02:54 PM

Thule Traverse Roof Rack Installation - 2006 Honda Accord- Video

Today on our 2006 Honda Accord, we'll be test fitting the Thule square load bar system, using part numbers THLB58, TH480, and THKIT1304. With our roof rack system assembled according to the instructions, we'll begin our test fit by opening our front doors. We'll place the front bar onto the front part of our roof. To ensure that we have this bar in the correct location, we need to measure 9-7/8" from the leading edge of the windshield to the closest point of our foot pack. We'll do this measurement for both sides of the vehicle to ensure that our feet are in line with each other. Once we have it set in place, we can use the included Allen tool to tighten our Allen bolt, which will secure our clamp around the roof line of our vehicle. more

Watch Video

8/29/2013 2:56:32 PM

Thule Traverse Roof Rack Installation - 2010 Honda Accord- Video

Today on our 2010 Honda Accord, we'll be test fitting the Thule square load bar system using the 58" bars, part number THLB58, the Thule Traverse roof rack foot pack, part number TH480, and the Thule roof rack fit kit for the Traverse foot, part number THKIT1560. With our roof rack system assembled according to the instructions, we'll grab our front bar and place it onto the front part of our roof. To ensure that we have our feet in the correct location, we need to measure 9-7/8" from the leading edge of the windshield to the closest point on our foot packs. We'll do this measurement on both sides of the vehicle to make sure that our feet are in line with each other. Once we have those in place, we can use the included tools to tighten down our clamps. With our clamp tight, we can slide the tool in place and close the lid of the foot pack. more

Watch Video

7/17/2013 3:38:38 PM

Thule Traverse Roof Rack Installation - 2012 Honda Accord- Video

Today on our 2012 Honda Accord well be test fitting the Thule Traverse Roof Rack System using part number THLB58, TH480 and THKIT1560. Now to begin our test fit weve already preassembled the roof rack system according to the instructions found within the fit kit so were ready to fit it to the vehicle. To begin well actually take up a measurement. Well measure from the top of the windshield, back on the roof 9 and 7/8 inches. This will be the location of the leading edge of our crossbar foot on both sides. We can then place our front crossbar in the correct location and after ensuring the crossbar is in the proper location we can go ahead and use the included Accutorc tools within each foot to tighten down the feet securing our front crossbar to the vehicle. more

Watch Video

9/4/2012 12:58:27 PM

Rhino-Rack Aero Roof Rack Installation - 2010 Honda Accord Coupe- Video

Today we are going to show you a complete Rhino roof rack for a 2010 Honda Accord Coupe. We will be using clamp kit part number DK151 and a crossbar and foot kit, part number DA126.The first step is some small assembly on the feet. Locate the M6 by 25 millimeter security screw, the spring washer and the flat washer, as well as the M6 flat nut. Take the M6 screw, slide on the spring washer and the flat washer. Com back to the foot and slide it up through the hole so that the threads are sticking out of the top of the foot. Loosely thread the M6 square nut on the top. This is going to be hole the foot attaches to the crossbar. Locate the M8 by 50 millimeter security bolt and the M8 pivot nut. On the back side of the foot, push the pivot nut into position and make sure the angled face faces outward. Back on the front side, again we are just going to hand thread the M8 security bolt. Repeat this assembly process for the other three feet. 1:05 more

Watch Video

5/1/2011 6:33:58 PM

  1